WaterGuard Plus Waterproof Fluorescent Fixtures

WaterGuards are ideal for interior and exterior use in wet areas such as inspection facilities, food plants, supermarket produce misting areas, amusement parks, car washes, parking garages, food processing plants, seacoast areas, tunnels, greenhouses, signage, water treatment plants, bridges, shopping malls, mining facilities, decorative lighting and corrosive areas. This product is available in a selection of 21 colors.

Designer-colored Fluorescent Lighting

StickLights are used worldwide for stage shows, trade shows and point of purchase displays. They are used to create interest in restaurants, casinos and office buildings. Available in a selection of 21 exciting, neon-type colors ranging from soft subtle colors to attention-grabbing vibrant colors, the applications are numerous and are limited only by the imagination of the graphics designer.

ShardGuard Safety-coated Fluorescent Lamps

Safety-coated fluorescent lamps that are acceptable for use in government-inspected food, meat and poultry plants, and are ideal for use in food processing areas, dairies, manufacturing facilities, hospitals, bakeries, schools, gymnasiums, cafeterias, restaurants, poultry plants, slaughterhouses and correctional facilities. If the lamp should happen to break, the glass, mercury and phosphorus are contained inside the strong safety coating.

ShardGuard Safety-coated Lamps for the Semiconductor Industry

This PC yellow/gold fluorescent lamp was designed specifically for the semiconductor industry to block all the emissions below 520nm. It is designed to retain glass fragments in the event of breakage. The coating will not crack, peel nor flake with age. This product has been used in semiconductor plants throughout the world and is UL-approved for this industry.

Clear and UV-blocking TubeGuards

TubeGuards are used with standard T8 and T12 fluorescent lamps which can be installed in overhead lighting fixtures. They are designed to contain broken glass in the event of breakage and for applications where white light is required but all UV emissions are to be blocked to protect carpets, furniture, works of art and all types of valuable items.

C20 UV Absorbing Filter

UV rays from the sun and artificial sources such as fluorescent lamps cause great damage to displays, paintings, books, watercolors, wood and fabrics. UV radiation will gradually induce fading, deterioration of organic materials and damage to the colors and fibers; UV immersions can also cause a number of health problems. The solution is EncapSulite’s clear, ultraviolet-absorbing filters.

Promolux Safety-coated Lighting for the Food Industry

This lighting is designed to enhance perishable displays with fresh and natural colors. The safety coating ensures that, should the lamp break, all of the glass, phosphors and other chemicals are contained within the coating. These safety-coated lamps also eliminate the UV output which helps maintain food freshness and provide a longer shelf-life for perishable products.

PolarGuard Low-Temperature Jacketed Lamps

These are the original shatterproof safety-jacketed HO (800ma) and VHO (1500ma) low-temperature fluorescent lamps. They were developed for use with T12 fluorescent lamps for freezer applications. PolarGuard lamps comply with FDA, USDA and OSHA standards. In the event of breakage, they are designed to contain the glass, phosphorus and mercury within the shatterproof jacket.

ShardGuard PTFE Safety-coated Tubes

This is a high quality, optically clear, high-temperature PTFE safety coating for use with HID, HPS, mercury vapor, PAR38, flood, heat and compact fluorescent lamps for all types of applications. ShardGuard shatter-resistant PTFE coated lamps are acceptable for incidental food contact in government-inspected meat and poultry plants and will not crack nor peel under normal operating conditions.